How to Hang Our Metal Prints: A Simple Guide

Hanging metal prints is an easy way to add a touch of personality to your home or office. Here's a simple guide on how to hang your metal prints from Wall of Love:

Materials Needed:

  • Metal print
  • Pencil
  • Bubble leveler
  • Screwdriver
  • Screws or adhesive strips 

Note: You Need to drill 1 screw in the top middle for small to medium prints and 2 for the large ones.

Step 1: Decide Where to Hang Choose the perfect spot for your metal print. Once you've decided, use a bubble leveler to make sure it's straight, and mark the spots with a pencil. Don't forget to mark the spot for the screw (refer the hangers behind the metal print).

Step 2: Choose the right hanging method based on the type of wall you have.

For Plasterboard Walls:

  • Use double-headed bear claw screws that can hold up to 30lbs on plasterboard or 100lbs on studs. You can purchase these screws from Bunnings.
  • If you have a stud finder, find a stud and drill on the stud for a stronger hold.

For Concrete or Brick Walls:

  • Use masonry screws and a masonry drill bit.
  • Drill a hole and insert the screw with a screwdriver.

For Timber Walls:

  • Use wood screws.
  • Drill a hole and insert the screw with a screwdriver.

Step 3: Hang Your Metal Print Once you've drilled the hole and inserted the screw, it's time to hang your metal print. Use the pre-installed shadow mount and hanger to securely hang your print.

Alternative Hanging Method: If you prefer not to drill into your walls, you can use adhesive strips. However, please note that adhesive strips may not hold up heavier prints, and may not be suitable for all wall surfaces.

Hanging metal prints from Wall of Love is an easy and simple way to add a touch of style to any room.